11166829 Danfoss Electrical Actuator PVEM 32 (157B4128)

Danfoss 11166829 PVEM 32 Actuator - 10R-05309

This actuator is a one on one interchangeable product for:

• The Danfoss 157B4116 (voltage 12V) actuator
• The Danfoss 157B4128 (voltage 24V) actuator

Product label with: 10R-05309.

The Danfoss actuator 11166829 is a proportional control actuator with closed-loop spool control. This spool is primarily used to control work function with medium performance requirements. 

Features for the Danfoss Actuator PVEM32 11166829:
Certification: ISO13849 Compliant
Connector Direction: 90 (Up)
Connector type: 1x4 DIN 43650-A/ISO4400 - 4-pin
Control signal: Ratiometric
Power consumption of the coil: 8 Watt
Voltage: 11-32 V
De-Stroke Reaction A: 225 ms
De-Stroke Reaction B: 120 ms
On-Stroke Response A: 225 ms
On-Stroke Response B: 120 ms
Nominal A Stroke: 7.0
Nominal B Stroke: 7.0
IP rating: IP65
Length: 89
Fault Reaction & Recovery: Indication Only
Function where the PVE turn of the coils: Power Save
Hysteresis: 15.0%
Maximum Pressure Spikes: 60
Pilot Pressure: 13.5
Product group: PVG 32/120 Proportional Valves
Valve Side interface: PVE32 O-Ring
PVEM32 Serie 7

Replacement item:
Replacement for PVE Series 0 : 157B4112
Replacement for PVE Series 1 : 157B4113  
Replacement for PVE Series 2/3 : 157B4116  
Replacement for PVE Series 4 : 157B4116 

The analog PVE Series 4,5 and 7 are electro-hydraulic actuators.
They are used to control a single work section of a PVG proportional valve group. 
The actuator positions the main spool in a PVG work section to control
either the flow or the pressure of the oil distributed to and from the work function.
The control signal to the actuator is an analog voltage signal, enabling the user
to operate the work function remotely by means of a joystick , a controller or the similar.

This actuator needs an analog voltage signal of 24 VDC. 

The actuator has no fault monitoring

For more (technical) information see the product attachments.

Photo's Copyright by Hydrauvision